To access the Controller the CTC WISER App needs to be configured.
To configure the CTC WISER goto :
iPhone/iPad Settings
Scroll down to CTC WISER
If you are new to CTC Wiser and want to get athe App up and running use these initial settings
keep WiFi names blank, turn on use user name , enter username and password for lan and wan. Enter IP address for lan and port 80 do same for wan, Make sure LM mode is turned OFF.
Display Status Bar Text in white rather than black
Change the displayed Application Icon (note application must be re-run once icon is changed before icon changes)
iCloud Sync
Hide Status Bar
Status Bar Text White
App Icon
Sync Setting between devices
Hide the Status Bar so that on an iPad the Wiser Screen is displayed full screen
Disabled the resume page refresh, making the page loading faster
Disable Resume Page Refresh
App String
Turn on App Support. When activated Orientation Control is disbled
Support for Embedded Machine Logic Machine5, Schneider Wiser for KNX, spaceLYnk and fellerLYnk Apps
App Mode
Specify App to run at start up
A different default screen can be displayed for landscape and portrait by enabling orientation.
Enable Orientation
Change what is displayed depending on orientation (see options below). When not set both landscape and portrait use Default/Portrait
Clear URL Scheme
Use orientation settings once orientation changes
Default/Portrait (Smart Phone)
Set Default/Portrait view to be Smart Phone or Desktop View
Default/Portrait Page No
Enter a page to display
Landscape (Smart Phone)
Set Landscape view to be Smart Phone or Desktop View
Landscape Page No
Enter a page to display
To find the number of a page
DOWNLOAD PDFYou can change the colour of the background around the Controller screen. A seperate colour can be set when on Wifi and when on 4G. This allows you to match the background to the Controller screen background so it appears as one
seamless screen, and also use it as a status indicator to indicate when on WiFI or 4G
SSL
Connect to controller using SSL
Wifi Name (1-4)
4 Local Wifi Network Name the controller is connected to can be specified
Port
Controller Port no e.g. 80
Address
Controller IP Address
Background Colour
Enter a Hex value for the colour you want eg. GREEN is #00FF00
Note : If you set the Wifi name (s), if your iPad/iPhone is connected to a named Wifi the app will connect using the LAN Setting, if a Wifi name doesn't match the Wifi the iPad/iPhone is connected to then the app will connect using the WAN Settings. If no Wifi name is set and the iPhone/iPad is connected to Wifi the app will connect using the LAN settings.
Connect to controller using SSL
SSL
Port
WAN Port that points to the controller Port no e.g. 8080
WAN IP Address
Address
Enter a Hex value for the colour you want eg. RED is #FF0000
Background Colour
You can enter a different user name and password for access via LAN and WAN. Even if the LAN and WAN passwords are the same both must be entered
Use User Name/Paswword
Enable user login
* THIS MUST BE ENABLED IF V2 FIRMWARE IS INSTALLED
Use Encrypted Only
User Name
LAN User Name
LAN User Password
Password
WAN User Name
User Name
Password
WAN User Password
Note : For the passwords the following characters can not be used: <>#%{}|~`[]':@!.?^;
Send On Start Landspace
Send command on startup or turned to Landscape
App
Application number eg Lighting 56
Group
Group Address
Value
Value
Send On Start Portrait
Send command on startup or turned to Portrait
App
Application number eg Lighting 56
Group
Group Address
Value
Value
Note : For the passwords the following characters can not be used: <>#%{}|~`[]':@!.?^;
Note : To set Remote Password on the Automation Controller, Select System, then Services, then Remote Services. Enable the Service and Enter a password
WAN Port
LAN Port
Port set in controller script eg 51515
Port set in controller script eg 51516
NOTE : to use the Widget a script must be placed of the Wiser. Click HERE for more info
Note : The current version of the Today Widget only sends commands to the Wiser, it does not receive commands, this feature will be added to later versions.
Enter the configuration details for each of the buttons 1 to 8 that are displayed on the Today Widget
Send
The text sent to the controller eg set light,1,255,0,
Note : \n (LF) is added automatically
Label
Description of the button (will automatically format over 2 lines if needed)
Image
The image for the button to display
The CTC Wiser Server gives the iPad/iPhone the ability to receive and act on command via TCP.
Server On
Turns on the Server functionality
Port
Set the port the server receives messages on
The CTC Wiser app most be running and in the foreground (due to IOS restrictions) for this function to work. When the App is closed/placed in the background/ On Screen lock the Server is stopped.
Currently 2 Commands are supported :
A small module can be installed on the controller to allow easy scripting of commands to the CTC Wiser. The Module and Documentation can be downloaded below:
If you want to send commands to the CTC-Wiser app from other sources eg Alarm panel, the string format you need to send is:
page,page no eg page,10 or
play, sound eg play,alarm
Sounds currently supported
:
alarm
click
error
emergency
doorbell
smoke
Note: play,stop will stop the current sound playing.